Practical notes on commercial fire alarm systems, NFPA 72 compliance, and North Carolina code, written by the licensed technicians who work on these systems every day across Raleigh and Wake County.
The FCC removed most of the friction from copper retirement in May 2026 and declined to protect legacy alarm devices. Here is what your fire alarm needs instead, whether your panel can take it, and what each option costs to run.
August 3, 2026Read the post →
After enough false activations, staff stop evacuating. Here is what the 2024 research says about pre-movement delay and evacuation complacency, and why the durable fix is technical rather than another training session.
August 3, 2026Read the post →
A failed fire alarm inspection in Raleigh reaches the Fire Marshal automatically through The Compliance Engine. Here is what gets written up, what the documentation rules actually require, and how to pass next time.
August 3, 2026Read the post →
A trouble light means part of your fire alarm system may not respond in a fire. Here is what each signal type means, when a fire watch starts in Raleigh, and what a week of waiting actually costs.
August 3, 2026Read the post →
Your fire alarm vendor has gone quiet. Here is how to confirm you are still monitored, collect the records you need, and switch contractors without a monitoring gap or a fire watch.
August 3, 2026Read the post →
Repeat false alarms in a commercial building come from contaminated detectors, bad airflow placement, and sensitivity drift. Here is what causes them and the work that stops them.
August 3, 2026Read the post →“FireTek handled our fire alarm system end to end — professional, code-compliant, and always responsive when we need them.”
Get a free, no-pressure consultation with a local FireTek specialist serving Raleigh and all of Wake County.
